Olympia

Cabin Sauna DIY Kit, assembly required

• Tongue-and-groove Nordic Spruce
• Thick pre-cut and notched timber sections
• Lumber sections are 1 & 1/2"" thick
• Door with tempered glass window
• Stainless steel hinges, heater, and fasteners
• Two benches for multi-level seating
• Full-length upper bench back support
• Full floor support and decking
• Single layer roofing shingles included
• Outdoor usage
• Covered exterior porch and sitting area
• LED interior lighting available as an upgrade
• Limited lifetime warranty on the sauna room; 5-year limited lifetime warranty on the heater and its components, with a 1-year warranty on the heating elements (coils)

• Holds up to six people
• Standard heater: 8.0kW requires, 220V, 40-amp, and 9.0kw requires, 220V, 50-amp, hardwire connect
• The wood burning stoves require no electrical hookup. These come with a full chimney and chimney kit for installation.
• Heater upgrades available: Virta electric heater, PRO20 wood-burning heater, and Legend wood-burning heater
• Exterior dimensions: 156″W x 125″D x 105″H
• Changing room dimensions: 75″W x 75″D x 84″H
• Sauna room dimensions: 75″W x 75″D x 84″H
• Lower bench dimensions: 75″L x 19″W
• Upper bench dimensions: 75″L x 24″W
• Door dimensions (x2): 32″W x 70″H
• Porch dimensions: 156″W x 39″D
• Assembled weight: 2,935 lbs.
• Shipping dimensions: 177″L x 46″W x 40″H
• Shipping Weight: 3,086 lbs.

Note: All dimensions are approximate

Heater: The Olympia comes standard with an electric heater. You can choose to upgrade it to a Virta deluxe heater or a wood-burning heater and chimney kit.

Several of our saunas are too large to ship with an LTL carrier – these units include the  Panorama, Sierra, Olympia, Summit, Everest, Knight, Pristine, Langley, Victoria, Infinite,  Round Cube, and Sun Cube. Due to their size, they must be shipped on a flatbed trailer for safe and efficient loading, transportation, and offloading.

A forklift is ​highly​ recommended for offloading these units. Many customers have these saunas delivered to an address with access to a forklift. We recommend meeting the driver at the location with a trailer capable of accommodating loads up to 3,500 pounds and 16 feet in length. Other customers will rent a forklift for offloading the sauna directly at the site of installation. If access to a forklift is not possible, offloading the unit by hand is another option. We recommend that a team of 4-6 people be available to offload the sauna. The driver will not assist in offloading, but will allow the customer 2 hours to offload. If the customer takes more than 2 hours to offload the sauna, they will be charged a $300 penalty fee.

We will work closely with you to plan the flatbed delivery of your sauna to best accommodate
your schedule. Once the pickup date has been confirmed with the driver, the Salus Saunas
team will notify you of the confirmation. Next, you will receive a call from our team when the sauna has been picked up. Finally, you will receive communication from the driver notifying you of the approximate estimated time your sauna will arrive.

Please note​: If you cancel your order while it is in transit or you are unable to accept delivery of your sauna at the pre-established time, you will still be responsible for the shipping fee.

Traditional saunas require very little upkeep. Simply wipe down the interior after each use and check for any dust or debris that you may have tracked in. Read more about long-term care and maintenance here.

Heater and stones are essential to a traditional sauna experience. With the room at least heated to 160ºF, the traditional sauna can be enjoyed two ways. The first is called a dry sauna, which lacks any added moisture. The second is called a wet sauna, where you sprinkle water onto the heated stones to create a refreshing burst of steam and added humidity.

Definite handyman or contracting skills are required. The instructions are basic and written for a global market with the assumption that the assembler has construction experience. Do not attempt to build on your own if you are not familiar with construction practices nor able to work with general instructions. It is recommended that you read the assembly manual in advance if you are unsure of your ability. Two people can generally assemble the unit in 2-3 days.

• All heaters should be installed by a licensed electrician
• All heaters require a 220/240 volt hardwired connection
• 8kw heaters require a 40 amp connection
• 9kw heaters require a 50 amp connection
• The wood burning stoves require no electrical hookup. These come with a full chimney and chimney kit for installation.

See additional electrical requirements here